What equipment and machinery repair does Rod do?

The welding side: cracked frames, broken brackets and mounts, worn buckets and blades, and the metal fatigue that shows up on anything that works for a living. Shop, farm and commercial gear, welded where the machine is parked, anywhere in Mobile County, AL. Call (251) 753-7337.

Can you weld a cracked forklift mast or frame?

Yes — masts, carriages, frames, overhead guards and mounts are structural welding work, and that is his end of it. What Rod does not do is service the truck: no hydraulics, no engine, no electrical, no inspections.

Will you weld a cracked or broken forklift fork?

No, and nobody should. Under the ANSI and ITSDF safety standard, deciding whether a fork can be repaired — and doing it — is the fork manufacturer's call, or that of someone of equal competence. Welding is specifically not recommended, because it destroys the heat treatment and leaves the fork brittle. A cracked fork gets replaced.

Do you service all of Irvington, AL?

Yes — Albert's Specialty Welding covers every neighborhood and zip code in Irvington, Alabama — including the Highway 90 corridor, the Two Mile Road area, rural Irvington farmland, plus the surrounding subdivisions and rural roads. We handle gate repair, railings and handrails, aluminum and stainless work, cast iron repair, and portable repair welding that comes to you. Rod is fully portable across Mobile County — call (251) 753-7337 for a free estimate.

What kind of welding do you do in Irvington?

Around Hwy 90 west, the most common jobs are gate repair, railings and handrails, trailer and equipment repair, and general repair welding. We work aluminum, cast aluminum, stainless steel and cast iron — choosing MIG, TIG, or Stick to fit the material and the job. We do not do structural or code welding; this is fabrication and repair work built to last.

Equipment & Machinery Repair · Irvington, AL

Equipment & Machinery Repair in Irvington.

Local equipment & machinery repair in Irvington, Alabama and the surrounding Mobile County area. Shop, farm and commercial gear welded back to work. Licensed and insured, with 50+ years of hands-on welding experience. 7+ Google reviews. Call (251) 753-7337.

7+ Reviews

Get a Free Estimate Call (251) 753-7337

Get a Free Estimate

Name and phone is all we need to call you back. Takes ~20 seconds.

7+ Google reviews · 50+ years · Licensed & Insured · Fully portable

Irvington, AL

Farm and shop machinery out along Hwy 90 and the farmland between Theodore and Grand Bay breaks the same way every time: a cracked frame, a snapped bracket, a bucket worn thin from years of loading. Rod welds it where it sits, matching whichever metal the machine was built with, from stainless down to a cast-aluminum housing.

What we handle

What Equipment & Machinery Repair Looks Like in Irvington, AL.

Equipment and machinery repair across Irvington — shop, farm and commercial gear
Cracked frames, broken brackets, worn buckets, and metal fatigue welded back to work
On-site so heavy equipment doesn't have to be hauled in
Aluminum, stainless, cast iron and cast aluminum
Free estimate; licensed and insured
Home base: the shop is right here in Irvington at 9641 Two Mile Road

Why this city, this service

Why Irvington Equipment & Machinery Repair Is Different.

Being based on Two Mile Road means Rod can reach a stuck implement without a long haul, but he stays honest if the job outsizes what his welder or the metal on the truck can handle: some jobs need capacity he does not carry, and he says so before any work starts instead of guessing.

Farm implements between Theodore and Grand Bay take the worst of it: brush hogs, loader buckets, hay equipment that cracks a frame mid-season and cannot wait on a shop opening. Rod fabricates the replacement bracket or section from the broken piece and re-welds it on-site, then quotes the whole repair free before he cuts any metal.

Elevation at Irvington runs around 135 feet. Heat cycling plus constant moisture is hard on welded joints, and a hairline crack becomes a broken mount fast. Rod repairs it in place rather than pulling the machine out of service to haul it in.

Equipment & Machinery Repair service area

Equipment & Machinery Repair Coverage Map — Irvington, Alabama

Centered near Irvington for orientation. Albert's Specialty Welding provides equipment & machinery repair throughout every Irvington neighborhood and zip code, plus the surrounding Mobile County area. Same welder, same number — Rod travels the whole county.

Open Equipment & Machinery Repair in Irvington on Google Maps

What folks say from Irvington

What Mobile County Says About Rod

“When we call, he shows up. He has fixed our equipment many times over the years. His work is outstanding and efficiently priced. Call him for all your repair needs.”

Mary M.November 2024 · Equipment Repair

Read all reviews on Google

Equipment & Machinery Repair · Irvington, AL

Request Equipment & Machinery Repair in Irvington.

Shop, farm and commercial gear welded back to work. Free estimates throughout Irvington and the surrounding Mobile County area. Tell us what you need welded — we'll confirm by phone during weekday office hours (8 AM–5 PM).

7+Google Reviews

Rather talk it through? Call (251) 753-7337 — answered live when we can, and returned quickly when we can't.

Name

Phone

Service needed

What's going on?

(optional)

Add address & timing details (optional)

Not required — we confirm all of this on the call-back.

Service address

City

Urgency

Preferred time window

Photos of the job

Optional — a photo or two is usually all Rod needs to quote it. Up to 5.

No spam — we only call to confirm. Takes about 30 seconds.

Equipment & Machinery Repair in Irvington — FAQs

What equipment and machinery repair does Rod do?
The welding side: cracked frames, broken brackets and mounts, worn buckets and blades, and the metal fatigue that shows up on anything that works for a living. Shop, farm and commercial gear, welded where the machine is parked, anywhere in Mobile County, AL. Call (251) 753-7337.
Can you weld a cracked forklift mast or frame?
Yes — masts, carriages, frames, overhead guards and mounts are structural welding work, and that is his end of it. What Rod does not do is service the truck: no hydraulics, no engine, no electrical, no inspections.
Will you weld a cracked or broken forklift fork?
No, and nobody should. Under the ANSI and ITSDF safety standard, deciding whether a fork can be repaired — and doing it — is the fork manufacturer's call, or that of someone of equal competence. Welding is specifically not recommended, because it destroys the heat treatment and leaves the fork brittle. A cracked fork gets replaced.
Do you service all of Irvington, AL?
Yes — Albert's Specialty Welding covers every neighborhood and zip code in Irvington, Alabama — including the Highway 90 corridor, the Two Mile Road area, rural Irvington farmland, plus the surrounding subdivisions and rural roads. We handle gate repair, railings and handrails, aluminum and stainless work, cast iron repair, and portable repair welding that comes to you. Rod is fully portable across Mobile County — call (251) 753-7337 for a free estimate.
What kind of welding do you do in Irvington?
Around Hwy 90 west, the most common jobs are gate repair, railings and handrails, trailer and equipment repair, and general repair welding. We work aluminum, cast aluminum, stainless steel and cast iron — choosing MIG, TIG, or Stick to fit the material and the job. We do not do structural or code welding; this is fabrication and repair work built to last.

Also serving nearby

Equipment & Machinery Repair Near Irvington.

Right at the Irvington city limit? We serve the surrounding Mobile County communities on the same routes — same welder, same response times.

Welding conditions in Irvington

Why Irvington metalwork fails — and what holds up.

The right metal and the right weld depend on where the job lives. Here is what the local climate and housing data say about welding in Irvington, and how Rod works around it.

Salt air & corrosion

90.6%

Irvington's air averages about 90.6% peak daily humidity with summer highs near 92.6°F. Warm, humid, salt-laden Gulf air is the environment corrosion research flags as severe — enough chloride and moisture to rust bare or coated steel gates, handrails, and railings within a few years. That's why Rod repairs coastal metalwork here in aluminum (which forms its own protective oxide layer) and stainless, and coats steel properly when strength has to win.

Local data: U.S. Census Bureau ACS 5-year (2022) · Open-Meteo climate archive (2023). Coastal-corrosion behavior per U.S. Army Corps of Engineers ERDC coastal-materials research.

Field Guide · Equipment & Machinery Repair in Irvington