My gate sags, drags the ground and will not latch — can that be fixed?

That is the everyday job. A sagging gate is nearly always a torn hinge, a cracked weld at a corner, a leaning post, or rust through the bottom rail — and the latch stops lining up because the frame has dropped, not because the latch failed. Rod cuts out what is rotten, re-welds the joints, pulls the frame back square and re-hangs it. Call (251) 753-7337.

Do you repair automatic gate openers, motors or sensors?

No. Rod welds the gate itself — hinges, frames, welds, posts and rails. Openers, motors, sensors, boards and remotes are a different trade, and you want a gate-automation company for those. If you are not sure which one you have, send a photo of the hinge side and he will tell you.

A vehicle hit my driveway gate. Is that a repair or a replacement?

Usually a repair. A bent frame can be pulled back square and re-welded, and an impact-torn hinge can be rebuilt into the post. Rod does not install new gates at all, so there is nothing in it for him to tell you it is beyond saving — if the frame really is finished, you will get that answer straight.

Do you service all of Irvington, AL?

Yes — Albert's Specialty Welding covers every neighborhood and zip code in Irvington, Alabama — including the Highway 90 corridor, the Two Mile Road area, rural Irvington farmland, plus the surrounding subdivisions and rural roads. We handle gate repair, railings and handrails, aluminum and stainless work, cast iron repair, and portable repair welding that comes to you. Rod is fully portable across Mobile County — call (251) 753-7337 for a free estimate.

What kind of welding do you do in Irvington?

Around Hwy 90 west, the most common jobs are gate repair, railings and handrails, trailer and equipment repair, and general repair welding. We work aluminum, cast aluminum, stainless steel and cast iron — choosing MIG, TIG, or Stick to fit the material and the job. We do not do structural or code welding; this is fabrication and repair work built to last.

Gate Repair · Irvington, AL

Gate Repair in Irvington.

Local gate repair in Irvington, Alabama and the surrounding Mobile County area. Sagging gates, broken hinges, latches and rust. Licensed and insured, with 50+ years of hands-on welding experience. 7+ Google reviews. Call (251) 753-7337.

7+ Reviews

Get a Free Estimate Call (251) 753-7337

Get a Free Estimate

Name and phone is all we need to call you back. Takes ~20 seconds.

7+ Google reviews · 50+ years · Licensed & Insured · Fully portable

Common symptoms

Gate Giving You Trouble? Start Here.

Most Irvington gate repair calls start with one of these. Rod comes to you, takes a look, and gives you a free estimate before any welding — call (251) 753-7337.

Hinges pulling out of the post, so the whole gate leans a little more every month
Old welds that finally let go — Rod cuts out the bad metal and re-welds it solid
A latch that no longer lines up with its catch, so the gate has to be forced shut
A cattle or farm gate bent by equipment, with the frame out of true
An ornamental panel or picket that has broken loose from the frame
A wheel or roller gate that binds, drags, or has worn its track

Irvington, AL

When an Irvington gate quits latching or starts dragging the drive, the fix is close by, because Rod repairs gates from the Two Mile Road shop out across the Hwy 90 corridor and the farmland every week. He cuts out the failed hinge or weld and re-hangs it square.

What we handle

What Gate Repair Looks Like in Irvington, AL.

Gate repair across Irvington — sagging, rusted, crooked, or won't-latch gates set right
Broken hinges and latches cut out and re-welded solid
Rusted-through metal replaced, bent frames straightened
Re-hung so it swings true and closes the way it should
On-site and portable — Rod comes to the gate
Covering rural Irvington farmland and the rest of Irvington, Monday through Friday, 8 to 5

Why this city, this service

Why Irvington Gate Repair Is Different.

Long rural driveways off Hwy 90 put real strain on a gate, and daily use plus damp air works the hinges loose and rusts the frame. Rod replaces worn hardware, straightens what is bent, and re-welds cracked joints so the gate closes right instead of being wrestled shut.

A farm gate between Theodore and Grand Bay that a tractor clipped, an ornamental panel come loose, a latch that never lines up: all repaired on-site, close to home. Rod gives a free estimate first and an honest word on mending versus replacing.

Midsummer afternoons in Irvington average close to 92.6°F. Metal that never gets a hard freeze also never gets a break from moisture, so rust works a gate frame from the inside out. Rod cuts back to sound metal before welding, because a bead laid over rust lets go again in a season.

Gate Repair service area

Gate Repair Coverage Map — Irvington, Alabama

Centered near Irvington for orientation. Albert's Specialty Welding provides gate repair throughout every Irvington neighborhood and zip code, plus the surrounding Mobile County area. Same welder, same number — Rod travels the whole county.

Open Gate Repair in Irvington on Google Maps

What folks say from Irvington

What Mobile County Says About Rod

“Took him all of 20 minutes to weld up my exhaust and then told me it didn't take enough work to charge me! 10/10 weld 11/10 service. GREAT MAN.”

Jay C.March 2025 · Portable Welding

“Have been using Albert's for 25 years through 3 different companies doing restaurant welding repairs. No job too large or too small, always on time, great attitude.”

Vicki C.January 2025 · Restaurant Equipment Repair

“When we call, he shows up. He has fixed our equipment many times over the years. His work is outstanding and efficiently priced. Call him for all your repair needs.”

Mary M.November 2024 · Equipment Repair

Read all reviews on Google

Gate Repair · Irvington, AL

Request Gate Repair in Irvington.

Sagging gates, broken hinges, latches and rust. Free estimates throughout Irvington and the surrounding Mobile County area. Tell us what you need welded — we'll confirm by phone during weekday office hours (8 AM–5 PM).

7+Google Reviews

Rather talk it through? Call (251) 753-7337 — answered live when we can, and returned quickly when we can't.

Name

Phone

Service needed

What's going on?

(optional)

Add address & timing details (optional)

Not required — we confirm all of this on the call-back.

Service address

City

Urgency

Preferred time window

Photos of the job

Optional — a photo or two is usually all Rod needs to quote it. Up to 5.

No spam — we only call to confirm. Takes about 30 seconds.

Gate Repair in Irvington — FAQs

My gate sags, drags the ground and will not latch — can that be fixed?
That is the everyday job. A sagging gate is nearly always a torn hinge, a cracked weld at a corner, a leaning post, or rust through the bottom rail — and the latch stops lining up because the frame has dropped, not because the latch failed. Rod cuts out what is rotten, re-welds the joints, pulls the frame back square and re-hangs it. Call (251) 753-7337.
Do you repair automatic gate openers, motors or sensors?
No. Rod welds the gate itself — hinges, frames, welds, posts and rails. Openers, motors, sensors, boards and remotes are a different trade, and you want a gate-automation company for those. If you are not sure which one you have, send a photo of the hinge side and he will tell you.
A vehicle hit my driveway gate. Is that a repair or a replacement?
Usually a repair. A bent frame can be pulled back square and re-welded, and an impact-torn hinge can be rebuilt into the post. Rod does not install new gates at all, so there is nothing in it for him to tell you it is beyond saving — if the frame really is finished, you will get that answer straight.
Do you service all of Irvington, AL?
Yes — Albert's Specialty Welding covers every neighborhood and zip code in Irvington, Alabama — including the Highway 90 corridor, the Two Mile Road area, rural Irvington farmland, plus the surrounding subdivisions and rural roads. We handle gate repair, railings and handrails, aluminum and stainless work, cast iron repair, and portable repair welding that comes to you. Rod is fully portable across Mobile County — call (251) 753-7337 for a free estimate.
What kind of welding do you do in Irvington?
Around Hwy 90 west, the most common jobs are gate repair, railings and handrails, trailer and equipment repair, and general repair welding. We work aluminum, cast aluminum, stainless steel and cast iron — choosing MIG, TIG, or Stick to fit the material and the job. We do not do structural or code welding; this is fabrication and repair work built to last.

Also serving nearby

Gate Repair Near Irvington.

Right at the Irvington city limit? We serve the surrounding Mobile County communities on the same routes — same welder, same response times.

Welding conditions in Irvington

Why Irvington metalwork fails — and what holds up.

The right metal and the right weld depend on where the job lives. Here is what the local climate and housing data say about welding in Irvington, and how Rod works around it.

Salt air & corrosion

90.6%

Irvington's air averages about 90.6% peak daily humidity with summer highs near 92.6°F. Warm, humid, salt-laden Gulf air is the environment corrosion research flags as severe — enough chloride and moisture to rust bare or coated steel gates, handrails, and railings within a few years. That's why Rod repairs coastal metalwork here in aluminum (which forms its own protective oxide layer) and stainless, and coats steel properly when strength has to win.

Local data: U.S. Census Bureau ACS 5-year (2022) · Open-Meteo climate archive (2023). Coastal-corrosion behavior per U.S. Army Corps of Engineers ERDC coastal-materials research.

Field Guide · Gate Repair in Irvington