Restaurant and Commercial Kitchen Equipment Welding: Back-of-House Repair
Stainless back-of-house repair for Mobile County restaurants — prep tables, shelving, hoods, racks, and equipment frames welded by a trusted local welder. Free estimates.
Most back-of-house repairs come down to stainless steel that has cracked, bent, or broken under daily use — prep tables, shelving, sinks, hood and vent supports, rack and cart frames, and equipment stands — and nearly all of it can be welded or re-fabricated instead of replaced at full price. A restaurant kitchen runs hard, and metal that gets bumped, loaded, washed, and heated every single day eventually fatigues. The goal is a solid repair that gets a working line back in service and holds up to the next round of abuse. Here is what we fix in Mobile County kitchens and how it works.
What back-of-house equipment can be welded?
More than most owners expect. The regulars we see across the county's kitchens:
- Stainless prep tables and work surfaces — cracked welds at the legs, bent frames, torn-out shelf brackets.
- Shelving and racks — wire and solid shelving, dish and sheet-pan racks, dunnage racks that have collapsed at a joint.
- Sinks and drainboards — cracked seams and failed supports.
- Hood, vent, and exhaust supports — brackets and hangers that hold heavy hood assemblies.
- Cart, rack, and dolly frames — the rolling gear that takes the most daily punishment.
- Equipment stands and legs — bent, wobbly, or cracked bases under ranges, mixers, and prep gear.
That is the heart of restaurant equipment repair: keeping the metal bones of the kitchen solid so the line keeps moving.
Why is stainless steel the right metal for kitchens?
Because it resists corrosion and wipes down bright, which is exactly what a food operation needs. Nearly all commercial kitchen equipment is stainless for that reason, and welding it well takes real heat control — too much and stainless can warp or lose some corrosion resistance in the affected zone. Our stainless steel welding is built for that: smooth beads on prep surfaces and frames that hold up to constant washdown. If you want the deeper explanation of how stainless behaves versus other metals, our aluminum vs. stainless vs. cast iron guide breaks it down.
The kind of shop restaurants call back
Kitchens don't want a stranger every time something breaks — they want a welder who did right by them last time. That is the ethos we have run on for 50+ years of hands-on experience: honest work, fair prices, and repairs that actually last, so the same restaurants call us back year after year. It is a repeat-customer business built the slow, honest way — no gimmicks, no invented fees, no job too odd. When a prep-table leg cracks at a spot along the Airport Blvd corridor or a rack frame fails at a busy kitchen in Tillmans Corner off Rangeline Road, owners know they can call and get a straight answer and a solid fix.
On-site repair or shop work — what's faster for a kitchen?
Both have their place, and we help you pick the one that gets you back in service soonest. Many back-of-house repairs happen right in the kitchen because the equipment is heavy, plumbed, or built-in — we are fully mobile across Mobile County and bring the shop to you. Smaller fixtures and custom stainless pieces are often faster and more precise at our Irvington shop, where we have the full setup for precise fit-up. Because kitchens keep tight hours, we plan the repair around your schedule — we work 8 to 5 Monday through Friday and coordinate a time that keeps your line running. See our portable welding guide for how on-site work goes.
Can you fabricate custom stainless pieces?
Yes, and kitchens need it constantly because spaces are tight and stock parts rarely fit. We fabricate the replacement stainless shelving sized to an odd wall, equipment stands re-welded to fit your gear, brackets and mounts, drain shelves, and one-off pieces nobody stocks. That crosses into our general equipment repair and custom work. Whether you run a place downtown, out in Theodore along the Hwy 90 corridor, or near the Port of Mobile, if you can describe the piece, we can usually build it to fit.
Do you serve restaurants across the county?
We do — from Downtown Mobile and Midtown eateries to the busy Hwy 90 and Rangeline Road strip in Tillmans Corner, up to Saraland along Hwy 43, and the seafood spots near the water and the Bayou La Batre fleet. Grab a commercial repair cell for your area or check the full Mobile County service page. We are fully portable and cover the whole county from our Irvington base.
Got back-of-house equipment down and a line to run? Call Rod Albert at Albert's Specialty Welding, (251) 753-7337, or reach us through the contact page. We are based at 9641 Two Mile Rd. in Irvington, work 8–5 Monday through Friday, and are fully portable across Mobile County. **Free estimates, ** No job too odd.