My gate sags, drags the ground and will not latch — can that be fixed?

That is the everyday job. A sagging gate is nearly always a torn hinge, a cracked weld at a corner, a leaning post, or rust through the bottom rail — and the latch stops lining up because the frame has dropped, not because the latch failed. Rod cuts out what is rotten, re-welds the joints, pulls the frame back square and re-hangs it. Call (251) 753-7337.

Do you repair automatic gate openers, motors or sensors?

No. Rod welds the gate itself — hinges, frames, welds, posts and rails. Openers, motors, sensors, boards and remotes are a different trade, and you want a gate-automation company for those. If you are not sure which one you have, send a photo of the hinge side and he will tell you.

A vehicle hit my driveway gate. Is that a repair or a replacement?

Usually a repair. A bent frame can be pulled back square and re-welded, and an impact-torn hinge can be rebuilt into the post. Rod does not install new gates at all, so there is nothing in it for him to tell you it is beyond saving — if the frame really is finished, you will get that answer straight.

Do you service all of Mount Vernon, AL?

Yes — Albert's Specialty Welding covers every neighborhood and zip code in Mount Vernon, Alabama — including Downtown Mount Vernon, the historic arsenal area, the Mobile River corridor, plus the surrounding subdivisions and rural roads. We handle gate repair, railings and handrails, aluminum and stainless work, cast iron repair, and portable repair welding that comes to you. Rod is fully portable across Mobile County — call (251) 753-7337 for a free estimate.

What kind of welding do you do in Mount Vernon?

Around the Mobile River, the most common jobs are gate repair, railings and handrails, trailer and equipment repair, and general repair welding. We work aluminum, cast aluminum, stainless steel and cast iron — choosing MIG, TIG, or Stick to fit the material and the job. We do not do structural or code welding; this is fabrication and repair work built to last.

Gate Repair · Mount Vernon, AL

Gate Repair in Mount Vernon.

Local gate repair in Mount Vernon, Alabama and the surrounding Mobile County area. Sagging gates, broken hinges, latches and rust. Licensed and insured, with 50+ years of hands-on welding experience. 7+ Google reviews. Call (251) 753-7337.

7+ Reviews

Get a Free Estimate Call (251) 753-7337

Get a Free Estimate

Name and phone is all we need to call you back. Takes ~20 seconds.

7+ Google reviews · 50+ years · Licensed & Insured · Fully portable

Common symptoms

Gate Giving You Trouble? Start Here.

Most Mount Vernon gate repair calls start with one of these. Rod comes to you, takes a look, and gives you a free estimate before any welding — call (251) 753-7337.

A gate frame that's twisted or out of square so it binds when you swing it
Hinges pulling out of the post, so the whole gate leans a little more every month
Old welds that finally let go — Rod cuts out the bad metal and re-welds it solid
A latch that no longer lines up with its catch, so the gate has to be forced shut
A cattle or farm gate bent by equipment, with the frame out of true
An ornamental panel or picket that has broken loose from the frame

Mount Vernon, AL

Hinges on rural gates near the historic arsenal area and along the Mobile River corridor wear through faster than the frame around them, especially on older gates that have hung the same way for decades. Rod replaces the worn hinge hardware, re-welds any cracked pin mount, and re-hangs the gate so it swings free again.

What we handle

What Gate Repair Looks Like in Mount Vernon, AL.

Gate repair across Mount Vernon — sagging, rusted, crooked, or won't-latch gates set right
Broken hinges and latches cut out and re-welded solid
Rusted-through metal replaced, bent frames straightened
Re-hung so it swings true and closes the way it should
On-site and portable — Rod comes to the gate
On call for Mount Vernon ZIP 36560 and the surrounding Mobile County area

Why this city, this service

Why Mount Vernon Gate Repair Is Different.

Downtown Mount Vernon and the rural county roads north of it carry driveway gates that see mostly farm trucks and long stretches of quiet, so a hinge tends to rust solid before anyone notices it dragging. Rod frees the pin, replaces the hardware that has failed, and squares the gate back up rather than tearing the whole thing down.

Along the Mobile River corridor the damp ground and river air work on hinge pins and welds faster than they do further inland, and a gate that hung fine last year can seize or sag by this one. Rod checks the hinge, the frame, and the latch together on-site, and gives a free estimate before deciding what actually needs fixing.

Mount Vernon counts about 578 housing units in the Census tally. Gates on settled property get opened and closed thousands of times, and the failure almost always shows up at a hinge, a latch pin, or an old weld. Those are repairs, not replacements, and Rod does them where the gate stands.

Gate Repair service area

Gate Repair Coverage Map — Mount Vernon, Alabama

Centered near Mount Vernon for orientation. Albert's Specialty Welding provides gate repair throughout every Mount Vernon neighborhood and zip code, plus the surrounding Mobile County area. Same welder, same number — Rod travels the whole county.

Open Gate Repair in Mount Vernon on Google Maps

What folks say from Mount Vernon

What Mobile County Says About Rod

“Took him all of 20 minutes to weld up my exhaust and then told me it didn't take enough work to charge me! 10/10 weld 11/10 service. GREAT MAN.”

Jay C.March 2025 · Portable Welding

“Have been using Albert's for 25 years through 3 different companies doing restaurant welding repairs. No job too large or too small, always on time, great attitude.”

Vicki C.January 2025 · Restaurant Equipment Repair

“When we call, he shows up. He has fixed our equipment many times over the years. His work is outstanding and efficiently priced. Call him for all your repair needs.”

Mary M.November 2024 · Equipment Repair

Read all reviews on Google

Gate Repair · Mount Vernon, AL

Request Gate Repair in Mount Vernon.

Sagging gates, broken hinges, latches and rust. Free estimates throughout Mount Vernon and the surrounding Mobile County area. Tell us what you need welded — we'll confirm by phone during weekday office hours (8 AM–5 PM).

7+Google Reviews

Rather talk it through? Call (251) 753-7337 — answered live when we can, and returned quickly when we can't.

Name

Phone

Service needed

What's going on?

(optional)

Add address & timing details (optional)

Not required — we confirm all of this on the call-back.

Service address

City

Urgency

Preferred time window

Photos of the job

Optional — a photo or two is usually all Rod needs to quote it. Up to 5.

No spam — we only call to confirm. Takes about 30 seconds.

Gate Repair in Mount Vernon — FAQs

My gate sags, drags the ground and will not latch — can that be fixed?
That is the everyday job. A sagging gate is nearly always a torn hinge, a cracked weld at a corner, a leaning post, or rust through the bottom rail — and the latch stops lining up because the frame has dropped, not because the latch failed. Rod cuts out what is rotten, re-welds the joints, pulls the frame back square and re-hangs it. Call (251) 753-7337.
Do you repair automatic gate openers, motors or sensors?
No. Rod welds the gate itself — hinges, frames, welds, posts and rails. Openers, motors, sensors, boards and remotes are a different trade, and you want a gate-automation company for those. If you are not sure which one you have, send a photo of the hinge side and he will tell you.
A vehicle hit my driveway gate. Is that a repair or a replacement?
Usually a repair. A bent frame can be pulled back square and re-welded, and an impact-torn hinge can be rebuilt into the post. Rod does not install new gates at all, so there is nothing in it for him to tell you it is beyond saving — if the frame really is finished, you will get that answer straight.
Do you service all of Mount Vernon, AL?
Yes — Albert's Specialty Welding covers every neighborhood and zip code in Mount Vernon, Alabama — including Downtown Mount Vernon, the historic arsenal area, the Mobile River corridor, plus the surrounding subdivisions and rural roads. We handle gate repair, railings and handrails, aluminum and stainless work, cast iron repair, and portable repair welding that comes to you. Rod is fully portable across Mobile County — call (251) 753-7337 for a free estimate.
What kind of welding do you do in Mount Vernon?
Around the Mobile River, the most common jobs are gate repair, railings and handrails, trailer and equipment repair, and general repair welding. We work aluminum, cast aluminum, stainless steel and cast iron — choosing MIG, TIG, or Stick to fit the material and the job. We do not do structural or code welding; this is fabrication and repair work built to last.

Also serving nearby

Gate Repair Near Mount Vernon.

Right at the Mount Vernon city limit? We serve the surrounding Mobile County communities on the same routes — same welder, same response times.

Welding conditions in Mount Vernon

Why Mount Vernon metalwork fails — and what holds up.

The right metal and the right weld depend on where the job lives. Here is what the local climate and housing data say about welding in Mount Vernon, and how Rod works around it.

Salt air & corrosion

92.7%

Mount Vernon's air averages about 92.7% peak daily humidity with summer highs near 95.5°F. Warm, humid, salt-laden Gulf air is the environment corrosion research flags as severe — enough chloride and moisture to rust bare or coated steel gates, handrails, and railings within a few years. That's why Rod repairs coastal metalwork here in aluminum (which forms its own protective oxide layer) and stainless, and coats steel properly when strength has to win.

Aging metalwork

52 yrs

The typical Mount Vernon home is around 52 years old (median build year 1970). Gates, handrails, wrought-iron railings, stair railings, and porch rails from that era are now the ones cracking at the welds, sagging on worn hinges, and rusting through at the base — exactly the gate repair calls Rod handles most across the older neighborhoods.

The community

1,463

Mount Vernon is home to roughly 1,463 people, median household income about $41,164 — a mix of homeowners, businesses, and property managers who need a welder who shows up, does honest work, and stands behind it. Fully portable out of Irvington, Rod brings the rig to the job anywhere in Mount Vernon.

Local data: U.S. Census Bureau ACS 5-year (2022) · Open-Meteo climate archive (2023). Coastal-corrosion behavior per U.S. Army Corps of Engineers ERDC coastal-materials research.

Field Guide · Gate Repair in Mount Vernon